Linux version 2.6.6 (root@rasta) (gcc version 3.3.3 (Debian 20040429)) #1 Sun May 23 12:29:25 EST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
128MB LOWMEM available.
On node 0 totalpages: 32768
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 28672 pages, LIFO batch:7
  HighMem zone: 0 pages, LIFO batch:1
DMI not present.
Built 1 zonelists
Kernel command line: ro root=/dev/hda5 vga=0x305 video=vesa
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 401.104 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 126576k/131072k available (1877k kernel code, 3928k reserved, 696k data, 132k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 788.48 BogoMIPS
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 008021bf 808029bf 00000000 00000000
CPU:     After vendor identify, caps: 008021bf 808029bf 00000000 00000000
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU:     After all inits, caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0596] at 0000:00:07.0
vesafb: framebuffer at 0xe6000000, mapped to 0xc8800000, size 4096k
vesafb: mode is 1024x768x8, linelength=1024, pages=4
vesafb: protected mode interface info at c000:02e5
vesafb: scrolling: redraw
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
SGI XFS with ACLs, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
Console: switching to colour frame buffer device 128x48
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c596a (rev 06) IDE UDMA33 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD400BB-00AUA1, ATA DISK drive
hdb: WDC WD84AA, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdd: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
 hda: hda1 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 > hda4
hdb: max request size: 128KiB
hdb: 16514064 sectors (8455 MB) w/2048KiB Cache, CHS=16383/16/63, UDMA(33)
 hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 hdb9 > hdb4
hdd: ATAPI 52X CD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. USB
uhci_hcd 0000:00:07.2: irq 10, io base 0000e400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
i2c /dev entries driver
Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30 08:19:30 2004 UTC).
PCI: Found IRQ 9 for device 0000:00:0a.0
PCI: Sharing IRQ 9 with 0000:00:0c.0
ALSA device list:
  #0: Ensoniq AudioPCI ENS1370 at 0xe800, irq 9
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
XFS mounting filesystem hda5
Ending clean XFS mount for filesystem: hda5
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 132k freed
Adding 262072k swap on /dev/hdb4.  Priority:-1 extents:1
Real Time Clock Driver v1.12
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 9 for device 0000:00:0c.0
PCI: Sharing IRQ 9 with 0000:00:0a.0
eth0: RealTek RTL-8029 found at 0xec00, IRQ 9, 00:00:01:01:10:8C.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-5336  Wed Jan 14 18:29:26 PST 2004
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
XFS mounting filesystem hda6
Ending clean XFS mount for filesystem: hda6
XFS mounting filesystem hda7
Ending clean XFS mount for filesystem: hda7
XFS mounting filesystem hda8
Ending clean XFS mount for filesystem: hda8
XFS mounting filesystem hda9
Ending clean XFS mount for filesystem: hda9
XFS mounting filesystem hda11
Ending clean XFS mount for filesystem: hda11
XFS mounting filesystem hda12
Ending clean XFS mount for filesystem: hda12
XFS mounting filesystem hdb5
Ending clean XFS mount for filesystem: hdb5
XFS mounting filesystem hdb6
Ending clean XFS mount for filesystem: hdb6
XFS mounting filesystem hdb7
Ending clean XFS mount for filesystem: hdb7
XFS mounting filesystem hdb8
Ending clean XFS mount for filesystem: hdb8
XFS mounting filesystem hdb9
Ending clean XFS mount for filesystem: hdb9
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Linux agpgart interface v0.100 (c) Dave Jones
0: NVRM: AGPGART: unable to retrieve symbol table
Linux video capture interface: v1.00
bttv: driver version 0.9.14 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 5 for device 0000:00:09.0
bttv0: Bt848 (rev 18) at 0000:00:09.0, irq: 5, latency: 64, mmio: 0xe8000000
bttv0: using: Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26 [card=8,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=0084ff00 [init]
bttv0: FlyVideo Radio=no  RemoteControl=yes Tuner=5 gpio=0x84ff00
bttv0: FlyVideo  LR90=no  tda9821/tda9820=no  capture_only=no 
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
tuner: chip found at addr 0xc2 i2c-bus bt848 #0 [sw]
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt848 #0 [sw]
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
usb 1-2: new low speed USB device using address 2
usb 1-2: USB disconnect, address 2
usb 1-1: new low speed USB device using address 3
usb 1-1: USB disconnect, address 3
usb 1-2: new low speed USB device using address 4
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Macally Peripherals  Macally DotMouse] on usb-0000:00:07.2-2
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usb 1-2: USB disconnect, address 4
usb 1-1: new low speed USB device using address 5
input: USB HID v1.10 Mouse [Macally Peripherals  Macally DotMouse] on usb-0000:00:07.2-1
usb 1-1: USB disconnect, address 5
